• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
Part15

Part15

License Free, legal, low-power radio broadcasting

  • About Us
  • Forums
  • Resources
  • Members
  • Contact Us
  • Log In
Forums
Main Category
Transmitter Talk
Time to test out an...
 
Notifications
Clear all

Time to test out another car transmitter!

 
Transmitter Talk
Last Post by Mark 7 years ago
7 Posts
3 Users
0 Reactions
806 Views
RSS
 RFCCRadioAudio
(@radiofreecedarcity)
Posts: 36
Trusted Member Registered
Topic starter
 

I've just ordered the Insignia Universal FM Transmitter. It'll be at the RFCC-Lebanon studios before the end of the month.

This transmitter is FCC Part 15 Certified with the FCCID being 2AEI7M35.

This transmitter, like the Prime Audio Wireless FM Transmitter and the Scosche TuneIt, has an 1/8" jack (3.5mm) for taking in audio from anything that has a headphone or 1/8" (3.5mm) output.

The Insignia also like the TuneIt, can use all frequencies between 88.1 MHz and 107.9 MHz and has to be powered via cigarette female to wall AC. There are some cigarette adapters that are cigarette female to USB-A male, which you can then use a USB female to wall AC plug to power what you want, or the kind I've been using which is just cigarette female directly to wall AC.

The hope is that it performs as well as the Prime Audio and the TuneIt or even better. Right now both those transmitters can make it about 200 to 250 feet before a complete fadeout, provided you are outdoors.

Sometime early next month, I'll let you know what I get out of it.


 
Posted : 23/05/2019 3:23 am
 Brooce
(@gnat1580)
Posts: 49
Trusted Member Registered
 

Yes.  I'm very interested in this and also

the adapters that allow one to use the device

In places other than the car.

These transmitters don't last forever.  They break

and we keep having to get replacements.

My C Crane transmitter is about 15 years old

and it's getting pretty rough around the edges.

The thing doesn't have to go very far because I'm just

transmitting through vintage radios in my house.

Now a bunch of us are talking about radios for the old

FM band, which - in the 1940s - ran from roughly 42 to

48 MHz.  When the "then new" 88 to 108 MHz band replaced

it in or around 1948, about 350,000 of the "45 MC"

sets hit the junk pile.  But some of them are still out

there.  If I have more to say about THAT,  I guess

I`'ll start another thread.

Brooce

 

 

replacements.


 
Posted : 24/05/2019 6:53 am
 RFCCRadioAudio
(@radiofreecedarcity)
Posts: 36
Trusted Member Registered
Topic starter
 

So the Insignia Universal FM Transmitter arrived sooner than I thought it would, so I have some test results from the home studio.

Currently the Edirol UA-3FX USB Interface is feeding audio to the Insignia, and the Edirol UA-3FX is being used as the sound card for a Dell Latitude D630 laptop that has Winamp running RFCC-Lebanon's automation.

The frequencies that work best in my area are 101.5 MHz and 101.7 MHz, although I take in a little bleeding from stations 40 or 50 miles away, but not too overpowering to where I can't use those frequencies.

So far, the Insignia's signal starts to wane at around 120 feet and dies at around 220 feet. The signal is best 100 feet or less from the transmitter. This is just an initial test around my home studio, but results could be different in another location and with different radio receivers. The sound quality is really good, better than any FM transmitter I've used so far.

As for how it stacks up against the Prime Audio and the Scosche transmitters at my disposal, the coverage area of the Insignia is less than the Prime Audio and Scosche, but has far better sound quality. It could be that the Insignia sacrifices coverage area for better sound quality.

I'll continue playing around with the thing to see if it maintains or improves what it's currently doing, or if things turn sour, but all in all, I think the Insignia is a fairly useful FM transmitter.


 
Posted : 27/05/2019 1:56 am
Mark
 Mark
(@mark)
Posts: 2330
Member Moderator
 

Your receiver is also a big factor in how far you will go with a good signal.

A lot of crappy radios image strong stations all over the band and weak ones don't get through.

The "bleeding" is just what I am referring to.


 
Posted : 27/05/2019 6:00 am
 RFCCRadioAudio
(@radiofreecedarcity)
Posts: 36
Trusted Member Registered
Topic starter
 

I have two AM/FM/SW receivers at my disposal, one analog (Kaito WRX911) and one digital (Radio Shack 2000669), so that's what I've been using to monitor my Talking House AM Transmitter and my assortment of FM transmitters originally designed for use inside cars. They're not the best receivers, but not the worst either, but pick up my signals within 200 to 300 feet away from any of my transmitters. I'm sure if somebody knows what they're doing with their receiver of choice, they'd get the same results I get.


 
Posted : 28/05/2019 3:47 am
 RFCCRadioAudio
(@radiofreecedarcity)
Posts: 36
Trusted Member Registered
Topic starter
 

UPDATE: After using the Insignia Universal FM Transmitter to broadcast some softball games live, my initial assessment was ironically enough "in the ballpark"...the signal dies at the outfield fences, which are about 200 to 220 feet away from home plate, then adding in about 20 feet from the press box to home plate, the maximum range in any direction is about 220 to 240 feet.


 
Posted : 19/06/2019 1:04 am
Mark
 Mark
(@mark)
Posts: 2330
Member Moderator
 

Pretty good for a transmitter made for getting your MP3 player to your car radio. Assume the audio cable acts as the antenna?
Guess if you need to get a better signal to the outfield fence it would have to be done by a better radio and not a better transmitter.
One good receiver easy to carry around that would be very good is this...
https://www.amazon.com/dp/B00F3SOR0S/ref=twister_B00J2M8Z4A?_encoding=UTF8&psc=1


 
Posted : 19/06/2019 7:20 am
Forum Jump:
  Previous Topic
Next Topic  
Share:
Forum Information
Recent Posts
Unread Posts
Tags
  • 13 Forums
  • 7,756 Topics
  • 63.6 K Posts
  • 17 Online
  • 2,249 Members
Our newest member: electronic
Latest Post: Here's a look at why we do processing and what each function does.
Forum Icons: Forum contains no unread posts Forum contains unread posts
Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed

Primary Sidebar

Online Members

 No online members at the moment

Recent Posts

  • Mark

    Here's a look at why we do processing and what each function does.

    Shows for FM but applies to AM also.

    By Mark , 3 days ago

  • Mark

    RE: Early 80s Realty Radio' AM transmitters

    I don't think the audio quality would be that good on t...

    By Mark , 2 weeks ago

  • RichPowers

    RE: Early 80s Realty Radio' AM transmitters

    I was very tempted to buy them both, they were dirt che...

    By RichPowers , 2 weeks ago

  • RichPowers

    RE: Part 15 Too Restrictive for Automakers

    @mark I had to pause when you mentioned "15 minute citi...

    By RichPowers , 2 weeks ago

  • Mark

    RE: Part 15 Too Restrictive for Automakers

    Your last part.... "It all very interesting but all I...

    By Mark , 2 weeks ago

Recent Topics

  • Mark

    Here's a look at why we do processing and what each function does.

    By Mark 3 days ago

  • RichPowers

    Part 15 Too Restrictive for Automakers

    By RichPowers 2 weeks ago

  • RichPowers

    From Virtue to Vice - Music Morality

    By RichPowers 3 weeks ago

  • RichPowers

    affordable DAC Impressive Versatility “audiophile quality” Promising Big performance at small price

    By RichPowers 3 weeks ago

  • RichPowers

    New Canadian Resident?

    By RichPowers 3 weeks ago

Topic Tags

  • Carl Blare3
  • KDX RADIO3
  • WINDOZE3
  • Transmitter2
  • Radio Phvern2
  • station upgrade2
  • archive.org2
  • playlist2
  • Zara Radio2
  • #SW2101
View all tags (75)

Copyright © 2026 · Part15.org · Log in

‹›×

    ‹›×