Artisan, that would be my best guess. The bushes are close enough to the radiator to increase the capacitance to ground, hence the inductive phase di...
If you check the schematic for the ATU-30 you will see connections for the power ground and fused connections for the power lines. These are for carr...
There's a link to the LPB ATU-30 manual on the ALPB home page. It has the schematic and parts list and may give you some ideas. Neil
Nice Idea I like your approach to this situation, simple and most likely reliable. Software solutions can be useful but they also can be a pain to i...
My installation is ground mounted over radials and to give some idea of how I did this I have attached two pictures. The radials are #12 insulated so...
That would be funny if you had planned it to work that way. Using multiple sound cards at my installation has, at times, been challenging. This work...
Kevtronics, We have no relationship with that forum so it would probably serve you better if you contact Bill about your concerns. You are welcome t...
A picture of what I use to receive AM. My Part15 transmitter is set up so that using this receiver with a wide IF bandwidth the audio response from t...
Indeed!