-
Part 15 Engineer replied to the topic Oompah Hour #429 in the forum Content / Media 9 months, 1 week ago
Hey Tim,
whats the name of that polka song running during the scene where max goldman (walter mathau) is in his shanty and loses his fishing pole and he starts running across the ice after it? it’s not cafe polka it’s something else.
-
Part 15 Engineer replied to the topic Part 15 going to micro-waves? in the forum General Discussion 1 year, 1 month ago
i use a 900 MHz Part 15 Spread Spectrum ISM Band IP / Ethernet Link to go to the next building to feed barix signal between my studio and procaster.
use regular 2.4/5g WiFi for my home internet. i would have hardwired it via public internet but i am using uncompressed pcm so i wanted a solid private link between sites.
-
Part 15 Engineer replied to the topic Finally Got My Remote Site Up and running in the forum Broadcast Equipment 1 year, 1 month ago
I feed the output of my omnia 3 am to both the barix 500 for the remote site (1600) and the Greek made dds carrier current (1560) transmitter which used an lpb t2c tuner in hot load as the antenna on the carrier current.
the remote site has the Barix 500 feeding a pair of 900 MHz part 15 Ethernet / IP radios over to the next building where it…[Read more]
-
Part 15 Engineer started the topic Finally Got My Remote Site Up and running in the forum Broadcast Equipment 1 year, 1 month ago
Got my fcc part 15 am remotely located site up and running.
I feed the omnia 3 am audio processor into a barix 500 streaming box set for PCM 16bit MSB @ 24kHz. That feeds an avalan aw900m wireless link system with 5dbi omni antennas (15.247) then to the remote site is received by another avalan aw900m which goes to the barix 100 decoder box which…[Read more] -
Part 15 Engineer replied to the topic Let's Take Back Part 15 Broadcasting in the forum General Discussion 1 year, 2 months ago
he has an ego large enough to fill Shea stadium a few times over. that site is simply to there to feed his over inflated ego and his feeling of self importance. he’s over compensating for a lack of something south if the border. an extreme case of little man syndrome!!!! I’m sure i will get moderated but it needed to be said out in the open.
-
Part 15 Engineer started the topic Looking to trade off some surplus gear in the forum Classifieds 1 year, 2 months ago
looking to trade off some surplus gear for some gear i need / can use,,,,
for more info see http://variety1560am.wixsite.com/index/equipment
also feel free to subscribe to the page to get notified of any changes.
-
Part 15 Engineer replied to the topic Swap: wheatstone tdm G6 Console, Sat Cage, power supply, Set of cables in the forum Classifieds 1 year, 3 months ago
pics of the G6 consoles as well as other gear i have for trade and gear i’m looking for in trade….
for more info see the below link….
-
Part 15 Engineer started the topic Swap: wheatstone tdm G6 Console, Sat Cage, power supply, Set of cables in the forum Classifieds 1 year, 8 months ago
Looking to swap one set of wheatstone tdm g6 console, satellite cage, power supply, set of cables with punch blocks, and wiring chart for puch block. This will require a bridge router. I only got one with the system and it is in use in my studio with one of the console sets. Pictured is the one in my studio but they are all the same setup.
These…[Read more]
-
Part 15 Engineer started the topic Custom Made AM Transmitter design in the forum Broadcast Equipment 1 year, 8 months ago
i’m looking for someone to help me design and build an am broadcast transmitter.
i have some old HF ham radio stuff as well as discreet components to work with for scrounging parts.
looking for DDS frequency synthesis.
PWM Modulation
Class D output (tube or solid state finals) adjustable from 0-10 Watt pep 0-2.5 Watt RMS.
Balanced 600 ohm…[Read more]
-
Horatio Caine and
Part 15 Engineer are now friends 1 year, 10 months ago
-
Part 15 Engineer replied to the topic I would love to have a setup like this guy has in the forum General Discussion 1 year, 10 months ago
board op position
-
Part 15 Engineer replied to the topic I would love to have a setup like this guy has in the forum General Discussion 1 year, 10 months ago
here is my setup
-
Part 15 Engineer replied to the topic Variety 1560 AM New Studios in the forum General Discussion 1 year, 12 months ago
i still need to get sound absorption foam panels. which i will probably do soon. probably add it to the ceiling and walls to minimize reflections.
-
Part 15 Engineer replied to the topic Variety 1560 AM New Studios in the forum General Discussion 2 years ago
studio desk top pic
-
Part 15 Engineer started the topic Variety 1560 AM New Studios in the forum General Discussion 2 years ago
Variety 1560 AM Studios now powered by wheatstone wheatnet tdm system.
Mics are heil classic pros and mic processing is symetrix 528E’s
-
Part 15 Engineer started the topic 10 years in prison for illegal streaming? It's in the Covid-19 relief bill in the forum Regulations / Law 2 years, 2 months ago
10 years in prison for illegal streaming? It’s in the Covid-19 relief bill
-
Part 15 Engineer started the topic FCC Starts Crackdown on Pirate Radio Landlords in the forum Regulations / Law 2 years, 3 months ago
-
Part 15 Engineer replied to the topic RFCC's updated website! in the forum General Discussion 2 years, 3 months ago
i get a 404 when going to the site
-
Part 15 Engineer started the topic LPFM / FM Translator Setup in the forum Classifieds 2 years, 4 months ago
is there any interest here in a lpfm / fm translator setup?
Local pickup in scottsbluff, NE and cash only
I’m selling the following gear as a set,,,
Agile 88-108 MHz RVR PTX20 fm transmitter 2-20w
Unbranded tunable 88-108 MHz dual band pass cavity currently tuned to 92.1
Aphex FM Pro 2020
Broadcast Electronics FC30 stereo g…[Read more] -
Part 15 Engineer replied to the topic selling off the contents of my part 15, parting it out in the forum Classifieds 2 years, 5 months ago
this is a newer version of the one i have, they no longer make this transmitter version anymore.
https://www.pll.gr/product?pid=AM-20W
it’s DDS Synthesizer, 1Hz, 10Hz, 100Hz, 1KHz, 5KHz, 9KHz, 10KHz Steps, 0-20W, 520-1710kHz, mono unbalanced 600 ohm input, 50 ohm so239 output, 2RU Rack size,
it is still available, asking $500.00 shipped conus.
- Load More