- AuthorPosts
- May 29, 2017 at 3:25 pm #11250
What volume level program do most use?
Just switched to MP3 Gain from the other I had for so long and seems to work good but find that if I set to 93 db for example it shows some tracks are 92.5 or 93,3 etc etc…..not all 93.0, wonder why?
A few show a red Y in the clipping column but this is not heard when listening.
A few that show clipping actually are less db than ones that show no clipping.
Wonder what experience othrs have had with this program if used.
Mark
May 29, 2017 at 4:36 pm #54657Part 15 Engineer
Guest
Total posts : 45366hardware,,
i run my on site library in uncompressed wav except for weekly / daily programs from others which run in mp3.
i have an AGC / Leveler followed by an optimod 9100b2 on my carrier current and a inovonics 235 on my remote 15.219 site.
June 2, 2017 at 4:37 pm #54755Radioham
Guest
Total posts : 45366I use the inovonics 222 as my final audio stage i keep all my audios maxed at the computer level and then run a Behringer MDX 1600 compressor limiter for a boost then allow it to feed the inovonics 222 which i have it modulating at 120-130 percent modulation, it helps your range as well because your louder with it peaked without distortion
Radioham
- AuthorPosts
- You must be logged in to reply to this topic.