- AuthorPosts
- August 22, 2007 at 9:46 pm #6988
Anyone on the list have schematics for the LPB S-22 console?
I recently acquired a non-working one and would like to get it up and running for my stations. Thanks!Anyone on the list have schematics for the LPB S-22 console?
I recently acquired a non-working one and would like to get it up and running for my stations. Thanks!
Regards,Lee RadioFreeErie AM/FM/SWAugust 22, 2007 at 10:28 pm #15907kc8gpd
Guest
Total posts : 45366i’m still waiting on lpb and i have also put a want ad over at http://radio-classifieds.com for a s22 manual. hopefully one of us will get a proper manual for it.
Thank You,
Rev. Robert P. Chrysafis
Universal Life Ministries
http://www.ulc.orgModerator Hunterdonfree
http://groups.yahoo.com/group/hunterdonfreeAugust 24, 2007 at 3:07 am #15916WILCOM LABS
Guest
Total posts : 45366Well,I blundered my way into it and found and replaced a bunch of blown up parts. I have the mixers all working,the headphone amp working but distorted,but nothing from the monitor amps. I need the schematics to go further,but it is running…
Regards,Lee
http://www.freewebs.com/wilcomlabs/index.htmAugust 24, 2007 at 10:36 am #15917kc8gpd
Guest
Total posts : 45366I always thought there might be something with those Transistors on the rear inside panel. Might try replacing them as i think they may be your mon, cue, hp, program amps.
Thank You,
Rev. Robert P. Chrysafis
Universal Life Ministries
http://www.ulc.orgModerator Hunterdonfree
http://groups.yahoo.com/group/hunterdonfreeAugust 30, 2007 at 2:33 am #15930WILCOM LABS
Guest
Total posts : 45366No,actually those are the pass transistors for the various power supply rails. One was blown due to a shorted tantalum cap on the main board. The monitor amp is a chip with the big heatsink,it is blown,no number on it. The cue amps are also blown up. The only thing working is the main mixer and all channels.
I REALLY NEED the schematics and manual for this unit,anyone???
Regards,Lee
http://www.freewebs.com/wilcomlabs/index.htm - AuthorPosts
- You must be logged in to reply to this topic.