- AuthorPosts
- January 4, 2017 at 9:40 pm #11042
just scored one of these consoles with 3 power supplies but i find very little info on them.
any ideas? manuals? value?
Seems to power up and buttons seem to do what they are suppose to, didn’t run audio through it yet
January 5, 2017 at 4:39 pm #52786Radiodugger
Guest
Total posts : 45366You got a jewel. This one went for $5000:
Doug
January 5, 2017 at 7:27 pm #52788Part 15 Engineer
Guest
Total posts : 45366i did locate and print out a pdf of the 110 page manual. i got this board plus $15/hr in exchange for some manual labor dismantling studio furniture and dumpstering it.
made me cry that i don’t have the room for that studio furniture and have to sit there and sawsall it all up and toss it in dumpster.
if had a home with a basement i would have dragged that studio furniture home and used it instead of dumpstering it
except for a little chipped paint mine is cherry
i have pics of it here,,,
https://www.dropbox.com/sh/tqukt40x3wbwmbd/AADlvJjAFcllSCKy8x9oInESa?dl=0
January 5, 2017 at 8:39 pm #52791Darsen the Third
Guest
Total posts : 45366A college near me has these in four practice radio rooms. They are retiring them because Harris/PR&E no longer exists as-is (they are now GatesAir) and support for the old analog models has dried up — parts, buttons and faders, lightbulbs, etc are not offered through the company anymore.
If you are handy and resourceful, you got a decent deal. But be ready to scrounge.
January 6, 2017 at 12:31 pm #52803Part 15 Engineer
Guest
Total posts : 45366second parts board as well. probably today. i have it up for sale but may (if i can convince the wife to allow it) put it in my air studio or maybe still sell it and put the A50 in my studio.
right now i just have a prmix 12 in the studio.
- AuthorPosts
- You must be logged in to reply to this topic.