Total posts : 45366
Thanks for the info @PhilB!
I see *lots* of confusion about the length of the radials themselves. Considering running this for AM band with a 3 meter above ground antenna shouldn’t the radials be at least equal to the antenna’s length? (i.e. 3 meter)
For the upper side of the AM band (1600-1710) how long is realistic radial arm length?
Is a balun required for this also?
So far I’ve spot stripped a 12 gauge ring of solid copper wire. I’ve removed 16 spots along the ring for wire to be soldered to the ring and then to be coated in liquid tape.