Total posts : 45366
I was suspicious of the Pyle being so cheap when most of them are expensive, otherwise I would have bought it.
50ft of sheilded cable was supplied with the rangemaster.. I cant recall right now if its 4 twisted pair or 8.. It’s not the higher quality Beldin, but I assume it will be fine (expecially considering the last time I had a install it inviolved over 100ft of regular telephone line!)
But back to the point in question; I wasn’t worried the reverse-phase thing would be a problem with the exciter itself, but when used in unision with other proccessing equipment..
As described in manual: “The signal output from the INSERT I/O jacks is reverse-phased. This will not be a problem if connecting the jack to an effector. If using the jack to connect to and external device, however, please be aware of possible phase conflicts with other signals.”