Total posts : 45366
I think you’ll have good luck simply pounding 8 foot copper grounding rods into the ground near your antenna mast. They cost about $13 apiece around here. It’s quick and easy. With a post hammer, you can quite literally pound one into the ground in about 5 minutes or less. Just wear some earplugs.
I’ve only done two and it seems to have helped. I’ll probably do two more this weekend.
I used U-bolts to fasten the copper grounding wire to the galvanized mast pipe. I would have preferred the equivalent of pipe grounding clamps like I used on the 1/2″ grounding rods, but couldn’t find anything like that for the 1 1/2″ mast pipe.