Classifieds - Part15 Forum

Procaster anyone?

Mark — Sat, 11 Apr 2026 06:04:55 +0000

Since Canada is not going to change the law to allow broadcasting on AM I can't see myself having a need for my Procaster and rather it sit here taking up space in the cupboard indefinitely maybe someone else can make use of it.
I am willing to let it go for $250 USD$$ or CAN$$ and that would include fast express shipping to Canada or USA. This is a good price and you can see what a new one costs.
I will send the transmitter, studio for power and audio to the Procaster, a length of 4 conductor shielded cable for connection from studio to Procaster and a 3 pole grounded 12 volt power supply.
I don't have the original antenna as I didn't get it when I bought the Procaster as I used it from indoors so that can be purchased separately from Procaster. More cable can be had from amazon. For me to buy the antenna and trying to ship it with the antenna which would need a box 1 meter long would cost much more so it's as is. I will include 104" wire with alligator clip. Even Rangemaster doesn't ship with antenna but he tells you where to get one. $250 firm. That will include the shipping express and if in the USA I will state on the declaration slip it is a repaired item not new so no(hopefully) extra tariffs but can't guarantee that.
If interested contact in forum personal contact. Sorry but I can't accept payments, only paid in full with Paypal.

Gittings / MLR AM Part 15 Prototype Transmitter

Part 15 Engineer — Wed, 18 Feb 2026 11:55:49 +0000

is there still any prototype Gittings / MLR part 15 am transmitter specimens still floating around? there were 2 or 3 that i was aware of. i have attached pics of the one i used to own.

I might be in the market (in maybe a few months from now) to acquire it if there is still one floating around. preferably working condition, non functioning but repairable is OK as well.

I am short on funds at the moment. i would swap some studio / maybe RF gear, though, if that interests you.

Thanks

Part 15 Engineer

1016 1017 1018 1019 1020

Fs:Russco stusio pro model b turntable

Part 15 Engineer — Tue, 24 Oct 2023 10:11:24 +0000

I got this old Russco studio pro model b turntable I would like to part with. I know there is a large market for these among vintage broadcast equipment collectors and its quite valuable. With that said it appears to be clean and complete. Platter seems to spin at the correct speeds in 45 and 33 modes and the mode lamps work. Switching is smooth. Needs a needle but has cartridge. I don't want to mess with eBay, PayPal and shipping. $900.00 Cash and local pickup in Scottsbluff NE. Just 45 mi north of i80 and 71 north (nebraska exit 22 off i80).

Looking to trade off some surplus gear

Part 15 Engineer — Sat, 01 Jan 2022 18:45:12 +0000

looking to trade off some surplus gear for some gear i need / can use,,,, for more info see http://variety1560am.wixsite.com/index/equipment also feel free to subscribe to the page to get notified of any changes.

Swap: wheatstone tdm G6 Console, Sat Cage, power supply, Set of cables

Part 15 Engineer — Sun, 18 Jul 2021 14:52:44 +0000

Looking to swap one set of wheatstone tdm g6 console, satellite cage, power supply, set of cables with punch blocks, and wiring chart for puch block. This will require a bridge router. I only got one with the system and it is in use in my studio with one of the console sets. Pictured is the one in my studio but they are all the same setup. These units have aes and analog i/o cards in them. I'm looking to trade one set of the above mentioned gear for the following, Orban 9300 AM processor (or similar processing) Radio Systems (now ISS) TR6000 carrier current AM transmitter I may be convinced to part with a second set of console gear (i have a total of four sets) for a up to date digital eas endec such as the sage blue digital endec with current firmware. I'm looking to upgrade my AM carrier current station. These came out of a working environment and are just currently sitting in storage gathering dust. They are surplus to my needs. I'm located in scottsbluff, NE and obviously due to weight / size it is a local exchange.

New Schlockwood 200, $300 shipped. Original shipping box and documentation.

jonny — Wed, 30 Dec 2020 14:24:28 +0000

New Schlockwoods 200, $450

Radio Studio Equipment Auction

DJboutit — Tue, 01 Dec 2020 17:05:37 +0000

https://www.k-bid.com/auction/35219?&page=1&fbclid=IwAR0zSmQ86CN7wZSxUHwUe2OuWnsFv9lEINugzFasCXEwVoD49-7Tmzo3rUI Here is a radio station auctioning off a lot of there studio equipment this is not my auction. They are auctioning off a few audio consoles mixing boards, limiter compressor, microphone amplifier, microphone boom arm and microphone cable, mini disk player. If you can get any of this for under $100 that would be a decent price the rest of the stuff is junk.

LPFM / FM Translator Setup

Part 15 Engineer — Sun, 15 Nov 2020 06:35:55 +0000

is there any interest here in a lpfm / fm translator setup? Local pickup in scottsbluff, NE and cash only I’m selling the following gear as a set,,, Agile 88-108 MHz RVR PTX20 fm transmitter 2-20w Unbranded tunable 88-108 MHz dual band pass cavity currently tuned to 92.1 Aphex FM Pro 2020 Broadcast Electronics FC30 stereo generator Telewave FM Low Pass Filter Henry 100 watt fm amp tuned to 89.xx retunable by Henry radio Local pickup in Scottsbluff, NE I will consider partial trade cash or complete straight trade if you have any or all of the equipment I need to complete my remote site part 15 am project. I need the following, Road case, Am NRSC asymmetrical processor such as a inovonics 235 or schlockwood sw400, Chez procaster, Pair of barix 500 or 1000 streaming endec. I’m done with fm going to complete part 15 am with a remote site, Going to use the funds to invest in the needed equipment for my part 15 am remote site. And yes i ran the rvr on low power into a dummy load. And no I didn't get busted by the fcc. Just figured fm isn't worth the effort for such short range.

Inovonics 531N FM Modulation Monitor For Sale

timinbovey — Sun, 18 Oct 2020 03:59:15 +0000

An unlikely pitch to Part 15 guys, but just in case. I have a like new Inovonics 531N FM Modulation Monitor for sale. Price is $2300 shipped anywhere in the USA. These list at $3600, and BSW's current discount price is $3240. Comes in original packing with manual as new. Only used as a demo. I suggest you check the Inovonics website for all the specs and details, or even the BSW site. For Part 15 use the major advantage is they read the signal off the air. So you can actually check your stations modulation and other parameters even with super low, legal Part 15 signals (provided your monitor is nearby your transmitter of course. For commercial radio it will read for many miles away). It is also frequency agile (sets up similar to a car radio with pushbuttons you set for the desired stations). It can also be connected to the internet so you can log into it and have access to all it's parameters and then some, and ALSO a live stream of the signal from the monitor. Which means you could give the link and info to others and they could listen in to your station via stream - without needing a streaming provider, etc. Just thought I'd toss it out there in case anyone is looking for one. Price is not negotiable. It's an expensive piece of equipment but this is a very good price. TIB

selling off the contents of my part 15, parting it out

Part 15 Engineer — Fri, 03 Jul 2020 17:40:31 +0000

I have the following for sale with the following asking prices,,, all pricing shipped conus (unless specified to contrary) includes paypal fees. i have more wiggle room on pricing if locally picked up with cash. Orban Optimod 2200 FM Processor / Stereo Generator $1000.00 shipped ConUS (have to look but i believe it has AES as well as analog) Inovonics 235 AM Processor $900.00 (SOLD) Shipped ConUS Barix 500 $300.00 (SOLD) Shipped ConUS Barix 100 x 3 (2 Exstreamers / 1 Instreamer) $250.00 (SOLD) Shipped ConUS RVR PTX20 Agile 2-20W FM Exciter $700.00 Shipped CONUS Broadcast Vision AXS-FMTD $200.00 Shipped conus Chez Procaster $250.00 Shipped Conus Excellent Condition Nicom BKG-77 (single Bay) $600.00 (local pickup 69341) Nicom BKG-77 (Bent element) good for parts $150.00 (Free with purchase of above BKG antenna) Dual cavity tuneable FM band pass filter (unsure of power rating) $1000.00 (Local Pickup 69341) TFT EAS quad Rx Receiver has AM FM WX VHF Rx Modules $400.00 Shipped ConUS Wheatstone A50 18ch console w/psu asking $500.00 Local P/U 69341 CRL CQUAM Stack, SGC-800, SEC-800 and SMP-950 $1000.00 Shipped ConUS LPB TCU-30 Carrier Current Coupler $300.00 Shipped conus RF Electronics "Fox" 0-20W DDS AM Transmitter $500.00 Shipped Conus Radio Engineering Associates AMM-SD1 am mod monitor (0-10W RF P/U Unit) $250.00 Shipped conus Inovonics 702 RDS Mini Encoder $150.00 Shipped ConUS